Heat transfer model for solar concentrators with biphasic flow

Authors

Keywords:

Heat transfer fluid, water, fresnel collector, thermal efficiency

Abstract

In this work, a dynamic mathematical model of heat transfer through the absorber tube of a Fresnel solar concentrator type, which uses water as working fluid, is developed. The water is considered to change phase as it flows through the absorber tube, giving rise to a monophasic region and a biphasic region. The model is validated with experimental data, published in the literature, and the thermal efficiency is analyzed as a function of the solar resource in this concentrator.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Ricardo Isaac Cázares-Ramírez, Universidad Autónoma Metropolitana

He is a professor at the Universidad Autónoma Metropolitana Unidad Iztapalapa and a member of the National System of Researchers.

Sergio Quezada-García, Universidad Nacional Autónoma de México

He is a professor at the Faculty of Engineering of the National Autonomous University of Mexico. He belongs to the National System of Researchers since January 2018.

Marco Antonio Polo-Labarrios, Universidad Nacional Autónoma de México

He has worked as Professor and Researcher at the Metropolitan Autonomous University (Iztapalapa and Cuajimalpa units) and at the Ibero-American University. He is currently a professor at the Faculty of Engineering of the National Autonomous University of Mexico and belongs to the National System of Researchers since January 2018.

Heriberto Sánchez-Mora, Instituto Politécnico Nacional

He graduated with a degree in Energy Engineering from the Autonomous University of Metropolitan Iztapalapa, and obtained his master's degree from the National Autonomous University of Mexico (UNAM). She is currently studying a Ph.D. in Physico-mathematical Sciences at the National Polytechnic Institute.

References

S.F. Moosavian, D. Borzuei, A. Ahmadi, Energy, exergy, environmental and economic analysis of the parabolic solar collector with life cycle assessment for different climate conditions, Renew. Energy. 165 (2021) 301–320. doi:10.1016/J.RENENE.2020.11.036.

S.K. Sansaniwal, V. Sharma, J. Mathur, Energy and exergy analyses of various typical solar energy applications: A comprehensive review, Renew. Sustain. Energy Rev. 82 (2018) 1576–1601. https://doi.org/10.1016/J.RSER.2017.07.003.

A. Raheem, W. Siddique, Z.H. Farooqui, T. Salameh, I. Haq, K. Waheed, K. Qureshi, Performance evaluation of adding Helical-screw Tape Inserts in Parabolic Solar Trough Collectors as a Source of Cleaner Energy Production, J. Clean. Prod. 297 (2021) 126628.

P.P. Dutta, S.S. Begum, H. Jangid, A.P. Goswami, T. Doley, M. Bardalai, P.P. Dutta, Modeling and performance evaluation of a small solar parabolic trough collector (PTC) for possible purification of drained water, Mater. Today Proc. (2021). doi:https://doi.org/10.1016/J.MATPR.2021.04.489.

B. Mohseni-Gharyehsafa, J.A. Esfahani, K.C. Kim, H. Ouerdane, Soft computing analysis of thermohydraulic enhancement using twisted tapes in a flat-plate solar collector: Sensitivity analysis and multi-objective optimization, J. Clean. Prod. 314 (2021) 127947.

H. Weldekidan, V. Strezov, R. Li, T. Kan, G. Town, R. Kumar, J. He, G. Flamant, Distribution of solar pyrolysis products and product gas composition produced from agricultural residues and animal wastes at different operating parameters, Renew. Energy. 151 (2020) 1102–1109.

X. Xu, K. Vignarooban, B. Xu, K. Hsu, A.M. Kannan, Prospects and problems of concentrating solar power technologies for power generation in the desert regions, Renew. Sustain. Energy Rev. 53 (2016) 1106–1131. doi:10.1016/J.RSER.2015.09.015.

R. Pal Kumar, K.R. Kumar, Investigations of thermo-hydrodynamics, structural stability, and thermal energy storage for direct steam generation in parabolic trough solar collector: A comprehensive review, J. Clean. Prod. 311 (2021) 127550. doi:10.1016/J.JCLEPRO.2021.127550.

S. Thappa, A. Chauhan, Y. Anand, S. Anand, Analytical comparison of two distinct receiver tubes of a parabolic trough solar collector system for thermal application, Mater. Today Proc. 28 (2020) 2212–2217.

A. Najafi, A. Jafarian, A. Arabkoohsar, A thorough three-dimensional simulation of steam generating solar parabolic trough collectors, a benchmark of various methods’ accuracy, Sustain. Energy Technol. Assessments. 47 (2021) 101456. doi:10.1016/J.SETA.2021.101456.

S.E. Ghasemi, A.A. Ranjbar, Effect of using nanofluids on efficiency of parabolic trough collectors in solar thermal electric power plants, Int. J. Hydrogen Energy. 42 (2017) 21626–21634. doi:10.1016/J.IJHYDENE.2017.07.087.

M. Siavashi, M. Vahabzadeh Bozorg, M.H. Toosi, A numerical analysis of the effects of nanofluid and porous media utilization on the performance of parabolic trough solar collectors, Sustain. Energy Technol. Assessments. 45 (2021) 101179. doi:10.1016/J.SETA.2021.101179.

R. Kumar Pal, K. Ravi Kumar, Two-fluid modeling of direct steam generation in the receiver of parabolic trough solar collector with non-uniform heat flux, Energy. 226 (2021) 120308. doi:10.1016/J.ENERGY.2021.120308.

A. Kumar, A. Kumar Tiwari, Z. Said, A comprehensive review analysis on advances of evacuated tube solar collector using nanofluids and PCM, Assessments. 47 (2021) 101417.

N.E. Todreas, M.S. Kazimi, Nuclear Systems I: Thermal Hydraulic Fundamentals, Hemisphere Publishing Corporation, USA, 1990.

J.C. Chen, A Correlation for Boiling Heat Transfer or Saturated Fluids in Convective Flow, ASME Pap. 63-HT-34. (1963).

R.W. Lockhart, R.. Martinelli, Proposed correlation of data for isothermal two-phase, two component flow in pipes, Chem. Eng. Prog. 45 (1949) 39–48.

D.K. Edwards, V.E. Denny, A.F. Mills, CHAPTER VI Transfer Processes, 2nd ed., Washington, D.C, 2008. doi:10.1016/s0074-6142(08)60507-0.

B.S. Pethukov, Heat Transfer and friction in turbulent pipe flow with variable physical properties, Adv. Heat Transf. 6 (1970) 504–564.

F.W. Dittus, L.M.K. Boelter, Heat Transfer in Automobile Radiators of the Tubular Type, Int. Commun. Heat Mass Transf. 12 (1985) 3–22.

C.F. Colebrook, Turbulent flow in Pipes, with Particular Reference to the Transition between the Smooth and Rough Pipes Laws, J. Inst. Civ. Eng. London. 11 (1939) 133–156.

S.E. Haaland, Simple and Explicit Formulas for the Friction Factor in Turbulent Pipe Flow, J. Fluids Eng. (1983) 89–90.

R.B. Bird, W.E. Stewart, E.N. Lightfoot, Transport Phenomena, Wiley, 1924.

W.H. McAdams, W.K. Woods, L.C. Heroman, Vaporization inside horizontal tubes - II: Benzene-oil mixture, Trans. ASME. 64 (1942) 193–200.

S. V. Patankar, Numerical Heat Transfer and Fluid Flow, Mc Graw Hill Book Company, New York, 1980.

S.S. Sahoo, S. Singh, R. Banerjee, Steady state hydrothermal analysis of the absorber tubes used in Linear Fresnel Reflector solar thermal system, Solar Energy, Sol. Energy. 87 (2013) 84–95.

S.S. Sahoo, S. Singh, R. Banerjee, Thermal hydraulic simulation of absorber tubes in linear Fresnel reflector solar thermal system using RELAP, Renew. Energy2. 86 (2016) 507–516.

INEL, RELAP5/MOD3 code manual: Code structure, system models, and solution methods. Volume 1, Nuclear Regulatory Commission, Washington, DC (United States), 1995.

Published

2022-07-29

How to Cite

Cázares-Ramírez, R. I., Quezada-García, S., Polo-Labarrios, M. A., & Sánchez-Mora, H. (2022). Heat transfer model for solar concentrators with biphasic flow. Revista Ingenierías, 25(93), 34–46. Retrieved from https://ingenierias.uanl.mx/index.php/i/article/view/73