About the Journal

Ingenierías is a biannual publication, edited by the Universidad Autónoma de Nuevo León, through the Facultad de Ingeniería Mecánica y Eléctrica.

Current Issue

Vol. 29 No. 101 (2026): Julio-Diciembre
Portada: Cuadrirrotor, Centro de Investigación e Innovación en Ingeniería Aeronáutica (CIIIA) de la UANL.

"Ingenierías" is a semiannual journal published every January and July by the Universidad Autónoma de Nuevo León (UANL) through the Facultad de Ingeniería Mecánica y Eléctrica (School of Mechanical and Electrical Engineering. FIME). This issue features some topics discussed at the "International Symposium on Drones and Unmanned Aircraft Systems (DUAS25)," held in October 2025 at the Centro de Investigación e Innovación en Ingeniería (Center for Research and Innovation in Engineering, CIIIA, FIME-UANL). In addition to these articles on scientific and technological developments in aeronautical engineering, this issue includes papers on electrical engineering and communications, such as short-circuit detection in synchronous generators, and the design of a filter based on distributed amplification. Regarding energy and environmental aspects, the issue covers topics such as photo-batteries for solar energy storage and conversion, acoustic anisotropy in wood applications, and the production and characterization of biochar from biomass for use in 3D printing.

 

Cover: Quadrotor, UANL Centro de Investigación e Innovación en Ingeniería Aeronáutica, CIIIA (Engineering Research and Innovation Center).

Published: 2026-07-25

Full Issue

Artículos

  • Análisis CFD del comportamiento hidrodinámico de un vehículo submarino no tripulado

    Luis Arturo Reyes Osorio, Octavio García Salazar, Bruno Silva Morales, Miguel Fernando Delgado Pamanes, Marisol Vázquez Tzompantzi
    4-14
    DOI: https://doi.org/10.29105/ingenierias29.101-999

  • Design and construction of a low-cost test bench for drones

    Alejandro Jiménez Flores, Luis Arturo Reyes Osorio, María Eugenia Juárez Huitrón, Edmundo Javier Ollervides Vázquez, Octavio García Salazar
    15-24
    DOI: https://doi.org/10.29105/ingenierias29.101-991

  • Modeling of re-entrant structures on an airfoil

    Ricardo Parga Montemayor, Luis Alberto López Pavón, Luis Arturo Reyes Osorio, Diego Reducindo Almanza, Octavio García Salazar
    25-37
    DOI: https://doi.org/10.29105/ingenierias29.101-998

  • Análisis aerodinámico–estructural de un micro turborreactor SR-30 para UAVs

    José de Jesús González Moreno, Diana Valeria Rodríguez Martínez, Luis Arturo Reyes Osorio, Patricia Zambrano-Robledo, Luis Amezquita Brooks
    38-50
    DOI: https://doi.org/10.29105/ingenierias29.101-996

  • Validation of a 3D-printed quadrotor: structure, model, and parameters

    Alejandro Jimenez Flores, Pablo Alfonso Tellez Belkotosky, Edmundo Javier Ollervides Vazquez, Luis Arturo Reyes Osorio, Octavio Garcia Salazar
    51-59
    DOI: https://doi.org/10.29105/ingenierias29.101-1009

  • Automated urban landscape segmentation and classification tool for eco-epidemiological surveillance using drones

    Sarahi Ventura Angoa, Víctor Muñiz Sánchez, Francisco Javier Hernández López, Rogelio Danis Lozano, Kenia Mayela Valdez Delgado
    60-75
    DOI: https://doi.org/10.29105/ingenierias29.101-1007

  • Design of sequential trajectories with finite-time convergence for autonomous aerial seeding

    Efrain Ibarra Jimenez, Ricardo Chapa Garcia, Romeo de Jesús Selvas Aguilar, Octavio Garcia Salazar, Miguel Rivas Martinez
    76-92
    DOI: https://doi.org/10.29105/ingenierias29.101-1002

  • Detection of inter-turn short circuits in synchronous generators

    Alejandro Pérez Olivo, Ernesto Vázquez Martínez, Manuel Andrade Soto
    93-106
    DOI: https://doi.org/10.29105/ingenierias29.101-1012

  • Sequential optimization algorithm for flying wings: bell-shaped lift distribution with optimal trim for stability

    Erik Gilberto Rojo Rodríguez, Gabriel Jérôme Vargas Moya, Edgar Ulises Rojo Rodríguez, Octavio García Salazar
    107-122
    DOI: https://doi.org/10.29105/ingenierias29.101-994

  • Study of a hybrid drone with vertical take-off and landing capabilities for volcanic monitoring

    Santiago Alemán Orozco, Octavio García Salazar, Luis Arturo Reyes Osorio, Diego Reducindo Almanza, Eduardo Steed Espinoza Quesada
    123-134
    DOI: https://doi.org/10.29105/ingenierias29.101-1005

  • Structural evaluation of a hybrid-design unmanned aerial vehicle

    Luis Arturo Reyes Osorio, Octavio García Salazar, Roberto Cabriales Gómez, Johana Gámez Treviño
    135-146
    DOI: https://doi.org/10.29105/ingenierias29.101-988

  • Transversal filter design based on distributed amplification for ultra-wideband wireless communications

    Jorge Aguilar Torrentera, Eduardo José Lorenzo Cañizares, César González Cervantes
    147-159
    DOI: https://doi.org/10.29105/ingenierias29.101-985

  • Photobatteries for solar energy storage and conversion

    Luis Antonio Solís-Balderas, Alfredo Romero-Contreras, Eduardo M. Sanchez Cervantes
    160-171
    DOI: https://doi.org/10.29105/ingenierias29.101-1011

  • Acoustic anisotropy in Fagus crenata wood-mesh-adhesive multi-material composites

    Javier Ramón Sotomayor Castellanos, Isarael Macedo Alquicira, Koji Adachi, Firas Hawasly
    172-182
    DOI: https://doi.org/10.29105/ingenierias29.101-984

  • Production and characterization of biochar from *Sargassum* spp. algal biomass via fast pyrolysis and its application in 3D printing.

    Ramón Valdivia González, Monika Yolotzin Velasco Gómez , Leonardo Chávez Guerrero , Julio Silva Mendoza, Odilia Pérez Camacho
    183-192
    DOI: https://doi.org/10.29105/ingenierias29.101-986
View All Issues