Anisotropía acústica en multimaterial madera-malla-adhesivo de Fagus crenata
DOI:
https://doi.org/10.29105/ingenierias29.101-984Palabras clave:
Ensayos ultrasónicos, velocidad de onda, incremento de densidad, homogeneización de propiedade, comportamiento isotrópicoResumen
El estudio analiza el efecto de convertir madera de Fagus crenata en un multimaterial madera–malla de acero–adhesivo sobre su anisotropía acústica. Mediante ensayos ultrasónicos no destructivos se compararon velocidades de onda en direcciones tangencial y longitudinal entre madera sólida y multimaterial. El multimaterial mostró mayor densidad, un aumento del 91 % en la velocidad tangencial y una disminución del 26 % en la longitudinal. Como resultado, el coeficiente de anisotropía acústica se redujo de 3.18 a 1.29, evidenciando una marcada homogeneización de las propiedades acústicas y un comportamiento más isotrópico.
Descargas
Citas
1. L. Espinosa, L. Brancheriau, Y. Cortes, F. Prieto, and P. Lasaygues, "Ultrasound computed tomography on standing trees: accounting for wood anisotropy permits a more accurate detection of defects," Ann. For. Sci., vol. 77, p. 68, 2020. doi: 10.1007/s13595-020-00971-z. DOI: https://doi.org/10.1007/s13595-020-00971-z
2. G. Manzo, J. Tippner, and P. Zatloukal, "Relationships Between the Macrostructure Features and Acoustic Parameters of Resonance Spruce for Piano Soundboards," Appl. Sci., vol. 11, no. 4, p. 1749, 2021. doi: 10.3390/app11041749. DOI: https://doi.org/10.3390/app11041749
3. I. Brémaud, J. Gril, and B. Thibaut, "Anisotropy of Wood Vibrational Properties: Dependence on Grain Angle and Review of Literature Data," Wood Sci. Technol., vol. 45, no. 4, pp. 735-754, 2011. doi: 10.1007/s00226-010-0393-8. DOI: https://doi.org/10.1007/s00226-010-0393-8
4. L. P. Perlin, R. C. de Andrade Pinto, and A. do Valle, "Ultrasonic tomography in wood with anisotropy consideration," Constr. Build. Mater., vol. 229, Art. no. 116958, 2019. doi: 10.1016/j.conbuildmat.2019.116958. DOI: https://doi.org/10.1016/j.conbuildmat.2019.116958
5. V. Bucur, "A Review on Acoustics of Wood as a Tool for Quality Assessment," Forests, vol. 14, no. 8, p. 1545, 2023. doi: 10.3390/f14081545. DOI: https://doi.org/10.3390/f14081545
6. J. Mackerle, "Finite Element Analyses in Wood Research: A Bibliography," Wood Sci. Technol., vol. 39, no. 7, pp. 579-600, 2005. doi: 10.1007/s00226-005-0026-9. DOI: https://doi.org/10.1007/s00226-005-0026-9
7. N. Tankut, A. N. Tankut, and M. Zor, "Finite Element Analysis of Wood Materials," Drv. Ind., vol. 65, no. 2, pp. 159-171, 2014. doi: 10.5552/drind.2014.1254. DOI: https://doi.org/10.5552/drind.2014.1254
8. L. Acuña, R. Martínez, E. Spavente, M. Casado, J. Álvarez-Martínez, C. O'Ceallaigh, A. M. Harte, and J.-A. Balmori, "Modulus of Elasticity Prediction Through Transversal Vibration in Cantilever Beams and Ultrasound Technique of Different Wood Species," Constr. Build. Mater., vol. 371, Art. no. 130750, 2023. doi: 10.1016/j.conbuildmat.2023.130750. DOI: https://doi.org/10.1016/j.conbuildmat.2023.130750
9. P. Niemz and D. Mannes, "Non-Destructive Testing of Wood and Wood-Based Materials," J. Cult. Herit., vol. 13, no. 3, Supplement, pp. S26-S34, 2012. doi: 10.1016/j.culher.2012.04.001. DOI: https://doi.org/10.1016/j.culher.2012.04.001
10. L. Kristak, I. Kubovský, and R. Réh, "New Challenges in Wood and Wood-Based Materials," Polymers, vol. 13, no. 15, p. 2538, 2021. doi: 10.3390/polym13152538. DOI: https://doi.org/10.3390/polym13152538
11. L. Kristak, R. Réh, and I. Kubovský, "New Challenges in Wood and Wood-Based Materials II," Polymers, vol. 15, no. 6, p. 1409, 2023. doi: 10.3390/polym15061409. DOI: https://doi.org/10.3390/polym15061409
12. A. Toğay, N. Döngel, C. Söğütlü, E. Ergin, M. Uzel, and S. Güneş, "Determination of the Modulus of Elasticity of Wooden Construction Elements Reinforced with Fiberglass Wire Mesh and Aluminum Wire Mesh," BioResources, vol. 12, no. 2, pp. 2466-2478, 2017. doi: 10.15376/BIORES.12.2.2466-2478. DOI: https://doi.org/10.15376/biores.12.2.2466-2478
13. C. A. Abade Bertolino, N. T. Mascia, C. D. Basaglia, and B. Fazendeiro Donadon, "Analysis of Fiber Reinforced Laminated Timber Beams," Key Eng. Mater., vol. 668, pp. 100-109, 2015. doi: 10.4028/www.scientific.net/kem.668.100. DOI: https://doi.org/10.4028/www.scientific.net/KEM.668.100
14. D. Faktorová, M. D. Stanciu, M. Krbata, A. Savin, M. Kohutiar, M. Chlada, et al., "Analysis of the anisotropy of sound propagation velocity in thin wooden plates using Lamb waves," Polymers, vol. 16, no. 6, p. 753, 2024. doi: 10.3390/polym16060753. DOI: https://doi.org/10.3390/polym16060753
15. H. Rangavar, "Wood-Cement Board Reinforced with Steel Nets and Woven Hemp Yarns: Physical and Mechanical Properties," Drv. Ind., vol. 68, no. 2, pp. 121-128, 2017. doi: 10.5552/drind.2017.1633. DOI: https://doi.org/10.5552/drind.2017.1631
16. J. R. Sotomayor Castellanos and I. Macedo Alquicira, "Vibraciones transversales para determinar el módulo dinámico e índice material en multimaterial de madera-malla-adhesivo en Fagus crenata," Revista Internacional de Investigación e Innovación Tecnológica, vol. 11, no. 63, pp. 39-62, 2023.
17. É. Hillig, I. Bobadilla, F. Arriaga, and G. Íñiguez-González, "Using Acoustic Testing to Estimate Strength and Stiffness of Wood-Polymer Composites," Maderas. Cienc. Tecnol., vol. 26, pp. 1-16, 2024. doi: 10.22320/s0718221x/2024.04. DOI: https://doi.org/10.22320/s0718221x/2024.04
18. I. Macedo Alquicira and J. R. Sotomayor Castellanos, "Velocidades del ultrasonido y módulos dinámicos de madera sólida, laminada y multimaterial de Pinus pseudostrobus Lindl.," in Proc. XXVII Congreso Internacional Anual de la Sociedad Mexicana de Ingeniería Mecánica, México, 2021, pp. 56-64. DOI: https://doi.org/10.21829/myb.2021.2732235
19. J. R. Sotomayor Castellanos and I. Macedo Alquicira, "Caracterización por ultrasonido del multimaterial madera-malla-adhesivo," Prisma Tecnol., vol. 16, no. 1, pp. 24-30, 2025. doi: 10.33412/pri.v16.1.3972.
20. A. N. Papadopoulos, "Advances in wood composites," Polymers, vol. 12, no. 1, p. 48, 2019. doi: 10.3390/polym12010048. DOI: https://doi.org/10.3390/polym12010048
21. K. Saal, H. Kallakas, E. Tuhkanen, A. Just, A. Rohumaa, J. Kers, et al., "Fiber-Reinforced Plywood: Increased Performance with Less Raw Material," Materials, vol. 17, no. 13, p. 3218, 2024. doi: 10.3390/ma17133218. DOI: https://doi.org/10.3390/ma17133218
22. N. Pahnabi, T. Schumacher, and A. Sinha, "Imaging of Structural Timber Based on In Situ Radar and Ultrasonic Wave Measurements: A Review of the State-of-the-Art," Sensors, vol. 24, no. 9, p. 2901, 2024. doi: 10.3390/s24092901. DOI: https://doi.org/10.3390/s24092901
23. E. G. Mason, M. Hayes, and N. Pink, "Validation of ultrasonic velocity estimates of wood properties in discs of radiata pine," New Zealand Journal of Forestry Science, vol. 47, Art. no. 16, 2017. doi: 10.1186/s40490-017-0098-y. DOI: https://doi.org/10.1186/s40490-017-0098-y
24. A. Wdowiak-Postulak, "Strengthening of Structural Flexural Glued Laminated Beams of Ashlar with Cords and Carbon Laminates," Materials, vol. 15, no. 23, p. 8303, 2022. doi: 10.3390/ma15238303. DOI: https://doi.org/10.3390/ma15238303
25. C. H. Lee, A. Khalina, and S. H. Lee, "Importance of interfacial adhesion condition on characterization of plant-fiber-reinforced polymer composites: A review," Polymers, vol. 13, no. 3, p. 438, 2021. doi: 10.3390/polym13030438. DOI: https://doi.org/10.3390/polym13030438
26. Y. Amin et al., "Effect of glue spread on bonding strength, delamination, and wood failure of jabon wood-based cross-laminated timber using cold-setting melamine-based adhesive," Polymers, vol. 15, no. 10, p. 2349, 2023. doi: 10.3390/polym15102349. DOI: https://doi.org/10.3390/polym15102349
27. ASTM E494-20, Standard Practice for Measuring Ultrasonic Velocity in Materials. West Conshohocken, PA: ASTM International, 2020.
28. ISO 13061-1:2014, Physical and Mechanical Properties of Wood - Test Methods for Small Clear Wood Specimens. Part 1: Determination of Moisture Content for Physical and Mechanical Tests, International Organization for Standardization, Geneva, Switzerland, 2014.
29. ISO 13061-2:2014, Physical and Mechanical Properties of Wood - Test Methods for Small Clear Wood Specimens. Part 2: Determination of Density for Physical and Mechanical Tests, International Organization for Standardization, Geneva, Switzerland, 2014.
30. F. Bockel, A. Harling, G. Grönquist, and A. Niemz, "Characterization of wood-adhesive bonds in wet conditions by means of nanoindentation and tensile shear strength," Eur. J. Wood Wood Prod., vol. 78, no. 3, pp. 449–459, 2020, doi: 10.1007/s00107-020-01520-1. DOI: https://doi.org/10.1007/s00107-020-01520-1
31. X. Zhang, F. Dubois, N. Sauvat, V. T. N. Tran, J. R. Lee, and J.-C. Dupré, "Hybrid numerical method for the ultrasonic wave propagation velocity in orthotropic materials," Wood Sci. Technol., vol. 56, pp. 1605–1630, 2022, doi: 10.1007/s00226-022-01416-8. DOI: https://doi.org/10.1007/s00226-022-01416-8
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2026 Javier Ramón Sotomayor Castellanos, Isarael Macedo Alquicira, Koji Adachi, Firas Hawasly
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
