About the Journal

Ingenierías is a biannual publication, edited by the Universidad Autónoma de Nuevo León, through the Facultad de Ingeniería Mecánica y Eléctrica.

Current Issue

Vol. 29 No. 100 (2026): Enero-Junio
View Vol. 29 No. 100 (2026): Enero-Junio

Ingenierías is a biannual journal published in January and July each year by the Universidad Autónoma de Nuevo León (Nuevo León State University, UANL), through its de la Facultad de Ingeniería Mecánica y Eléctrica (School of Mechanical and Electrical Engineering, FIME). This issue features articles on scientific and technological dissemination, including an accessible approach to learning automatic control; an experimental and exploratory protocol for obtaining biodiesel from recycled edible vegetable oil; the design of thermomechanical processing and cooling routes for developing high-strength steels, taking chemical composition into account; SiO₂-TiO₂ coatings applied using the sol-gel technique to improve the mechanical and electrochemical behavior of the Al 6061-T6 alloy; and the viscoelastic response of cubic auxetic structures manufactured using additive manufacturing via 3D printing, with polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) as base materials.

Published: 2026-01-29

Full Issue

Artículos

  • Self-built laboratory for learning automatic control

    Efrain Alcorta Garcia, David Alejandro Díaz Romero, Ernesto Zambrano Serrano, Miguel Ángel Platas Garza, Jesús Daniel Garza Camarena
    3-9
    DOI: https://doi.org/10.29105/ingenierias29.100-981

  • Obtaining and characterizing biodiesel from recycled vegetable oil

    Saida Mayela García Montes, Lesli del Carmen Balderas Torres, Rodolfo Morales Ibarra, Cinthya Soreli Castro Issasi
    10-15
    DOI: https://doi.org/10.29105/ingenierias29.100-980

  • Effect of chemical composition on the processing of microalloyed steels

    Mariana Valdez Vazquez, Martha Patricia Guerrero-Mata
    16-29
    DOI: https://doi.org/10.29105/ingenierias29.100-977

  • Study of the nanoindentation of SiO₂–TiO₂ thin coatings

    Alejandra Vallejo Martinez, Luis Arturo Reyes Osorio, Iván Eleazar Moreno Cortez, Luis Alberto López Pavón
    30-40
    DOI: https://doi.org/10.29105/ingenierias29.100-975

  • Effect of strain rate on the viscoelastic response of 3D-printed ABS and PLA auxetic structures

    Jesús Gabino Puente Córdova, Flor Yanhira Rentería Baltiérrez, Mario Alberto Bello Gómez, Nasser Mohamed Noriega
    41-52
    DOI: https://doi.org/10.29105/ingenierias29.100-983
View All Issues